GE Agile P50 Series - 2.4.21.3 View;Edit Settings (If setting is enabled for IEEE curve)

P50 Agile P153
5 Configuration
P153/EN M/B
5-99
2.4.21.3 View/Edit Settings (If setting is enabled for IEEE curve)
IN
1
>1 Current Set
1.00 A
IN1>1 Time Dial
1.00
3 4 3 4
IN1>1 Reset Char
DT
3 4
IN1>1 tRESET
1.00 S
3 4
IN1>1 2H Blocking
Disabled
3 4
IN1>1 Reset Char
IDMT
3 4
IN1>1 RTMS
1.000
3 4
IN1>1 2H Blocking
Disabled
3 4
3 4
IN1>1 Function
IEEE M Inverse
EARTH FAULT 1
4
GROUP 1
6
4 3
3- - -4
3 For Save
CLEAR For Cancel
4
SAVE Settings
3
CLEAR
DISCARD Settings
EDIT
(*)
(*)
(*)
(*)
(*)
(*)
(*)
(*)
(*)
Measured
3 4
(*)
Note: The display windows shown in dashed lines will be seen if the IN1>1 Reset Char is
selected as IDMT.
(*) indicates Edit key used to modify settings. Refer to the View and Edit settings
section.