GE Agile P50 Series - 1 Chapter Overview

P50 Agile P153
7 Protection Parameter Settings
P153/EN M/B
7-3
1 CHAPTER OVERVIEW
This chapter consists of the following sections:
1
Chapter Overview
2 Protection Parameter Settings
2.1 System Data
2.2 CB CONTROL Settings
2.3 DATE AND TIME Settings
2.4 CONFIGURATION Settings
2.5 TRANS. RATIOS Settings
2.6 RECORD CONTROL Settings
2.7 COMMUNICATION Settings
2.8 IO CONFIGURATION Settings
2.9 O/P RELAY CONFIG Settings
2.10 DISTURBANCE RECORD Settings
2.11 COMMISSION TEST Settings
2.12 GROUP Settings
2.12.1 SYSTEM CONFIG SETTINGS
2.12.2 OVERCURRENT Settings
2.12.2.1 I>1 Function
2.12.2.2 I>2 Function
2.12.2.3 I>3 Function
2.12.3 EARTH FAULT 1 (Measured)
2.12.3.1 IN1>1 Function
2.12.3.2 IN1>2 Function
2.12.3.3 IN1>3 Function
2.12.4 EARTH FAULT 2 (Derived)
2.12.4.1 IN2>1 Function
2.12.4.2 IN2>2 Function
2.12.4.3 IN2>3 Function
2.12.5 THERMAL OVERLOAD Settings
2.12.6 UNDERCURRENT Settings
2.12.7 COLD LOAD PICKUP Settings
2.12.8 NEG SEQUENCE O/C Settings
2.12.8.1 I2>1 Function
2.12.8.2 I2>2 Function
2.12.8.3 I2>3 Function
2.12.9 BROKEN CONDUCTOR Settings
2.12.10 CB FAIL Settings
2.12.11 VIEW RECORDS