GE akta pure - Page 79

Connect power to computer
equipment
Follow the manufacturer's instructions to connect power to the:
•
computer
•
monitor
•
local printer, if used
Connect to network
Follow the instructions below to make network connections.
ActionStep
Connect a network cable between the Computer connector (network) on
the back of the instrument and the computer network card.
1
The illustration below shows the symbol of the network connector.
If the computer is to be connected to an external network, connect a network
cable between the main network card of the computer and a network wall
outlet.
Note:
If the computer has not been supplied by GE and if network configuration is
to be used, see Administration and Technical Manual for further information
on network settings.
2
ÄKTA pure Operating Instructions 29022997 AF 79
4 Installation
4.2 Hardware installation
4.2.3 Connect system units