2042480-001 C Dash 2500 Patient Monitor D-5
Maintenance: Repairs
Repairs
If your product requires warranty, extended warranty, or non-warranty repair
service, contact GE Medical Systems Information Technologies Technical Support
at 1-800-558-7044 (USA) or contact your local representative.
Estimates for non-warranty repairs are provided at no charge; however, the
product must be sent to GE Medical Systems Information Technologies for an
estimate. To facilitate prompt service in cases where the product has external
chassis or case damage, please advise the representative when you call.
The representative will record all necessary information and will provide a
Return Authorization Number. Prior to returning any product for repair, a Return
Authorization Number must be obtained.
Packaging Material
Retain original packaging materials for future use in storing or shipping the
Monitor and accessories. This recommendation includes corrugated shippers
and foam/corrugated spacers.
Whenever possible recycle the packaging of accessories and patient applied parts.
Packing Instructions
If you have to return goods for service, follow these recommended packing
instructions:
Remove all hoses, cables, sensors, power cords, and ancillary products from
the Monitor before packing.
Wherever possible use the original shipping carton and packing materials.
Observe the environmental conditions detailed in the Product Overview
section of this manual.
It is recommended that all returned goods be insured. Claims for loss or damage
to the product must be initiated by the sender.
Disposal of Product Waste
As you use the Dash 2500 Patient Monitor, you will accumulate solid wastes that
require proper disposal or recycling. These include batteries, patient applied
parts, and packaging material. Dispose of these materials according to local or
national regulations. Refer to the “Battery” section for disposal of batteries.
To Next Page
Loading...
Need help?
General
