GE Dash 2500 User Manual

4-12 Dash 2500 Patient Monitor 2042480-001 C
Alarms: System Fault Alarm
choose event to view
This option lets you choose to display an event's frozen waveform.
print this event
This option lets you print the chosen event's frozen waveform. It is available
when the printer is not busy and a stored event has been chosen.
delete this event
This option lets you delete the chosen event.
delete all frozen waveforms
For the events listed, choosing this option deletes the frozen waveforms that are
stored for those events. These events will no longer be displayed in the Events
with Frozen Waveforms window.If this event is still one of the most recent 200
patient events, it will continue to appear in the Patient Event History window.
An asterisk (*) will no longer appear in its waveform column.
System Fault Alarm
If a system fault occurs, you will hear a constant tone and the screen will be
blanked within 5 seconds. The cause of the system fault is stored in the system
events as a fault code.
How to respond to a System Fault Alarm
1. If the Monitor is alarming, turn it off.
2. Contact GE Medical Systems Information Technologies Technical Support at
1-800-558-7044 (USA) or contact your local representative.

GE Dash 2500 Specifications

General

Brand	GE
Model	Dash 2500
Category	Medical Equipment
Language	English