DigitalFlow™ GF868 Programming Manual (1-Channel) 61
Chapter 4. Printing Data
4.2.1 Numeric Format (cont.)
5. Use the [, [ and [F1]-[F4] keys to select the second parameter to be printed.
6. Use the [, [ and [F1]-[F4] keys to select the third parameter to be printed.
7. Use the [, [ and [F1]-[F4] keys to select the desired time increment (the frequency at which measurements are
taken). The available options are: 5sec, 10sec, 30sec, 1min, 3min, 6min and 12min.
After the time increment is chosen, the Model GF868 returns to the standard data display screen and continues to take
measurements. The live data is printed at the specified time intervals, until a STOP command is issued (see the
instructions for the STOP submenu). A portion of a typical printout is shown in Figure 3.
Figure 3: A Typical Numeric Printout
DATA_DUMP OF (SITE NAME)
Ch1 Channel LABEL Channel Message
Start Date
Start Time
HH:MM:SS
03:08:40 P
03:08:50 P
03:09:00 P
03:09:10 P
03:09:20 P
03:09:30 P
03:09:40 P
03:09:50 P
03:10:00 P
03:10:10 P
.
.
ACF/HR
686.85
684.00
678.12
680.58
.
.
670.70
675.99
669.79
675.59
662.28
666.71
VOLUM
232.57
236.34
234.46
.
.
ACF
230.45
228.58
226.71
224.84
222.70
220.83
218.92
+TOTL
20 OCT 97
03:08:40 PM
1039.082
.
1038.860
1039.255
.
FT/S
1039.511
1039.105
1039.137
1039.470
1039.509
1039.003
1039.147
SNDSP
CH1 CH1 CH1
To Next Page
Loading...
