GE Druck ADTS 405 R/F Mk2

Testing Aircraft Systems or UUT
© 2015 General Electric Company – All rights reserved. ADTS 405 Mk2 Instruction Manual-English | 41
CONFIGURATION
Function and comments
C
ONFIG (SETUP + F1)
[UNITS] Default units
Hold F1 and press SETUP to enter CONFIG.
[AERONAUTICAL] Sele ct default aeronautical units
Step through available units
Save selected units
Step back through available units
[NEXT]
[PREV]
[SAVE]
[PRESSURE] Select default pressure units
Step through available units
Save selected units
Step back through available units
[NEXT]
[PREV]
[SAVE]
[TEMPERATURE] Select default temperature units
[C]
°C
°F [F]
[LIMITS] MsrƉkyviwixw of limits
[EDIT LIMITS]
[EDIT EXISTING]
Change limit values
Change existing values
(aircraft 1 \ aircraft 2...)
As NEXT, in reverse order
Select aircraft to EDIT limits
[NEXT]
[PREV]
[SEL]
[NEXT]
[PREV] As NEXT in reverse order
Switch (tog gle) to ARINC 565 limits
Limit value
[ON/OFF]
data entry
[ALPHA]
c
Insert alphabet character in name
NAME \ MAX ALT \ MIN ALT \ MAX CAS \ MIN CAS \ MAX
MACH \ MAX ROC \ MAX RATE
CAS \ MIN Ps \ MAX Ps \ MIN Qc \ MAX Qc \ MAX RATE Ps
\MAX RATE Qc \ ARINC
LIMITS \ AL
TITUDE CORRECTION
d
Nudge up select next letter in alphabet
Nudge down select
previous letter in alphabet
Delete last character in name
Create new limits. As for [EDIT EXISTING][SEL] above
Create maximum limits called “MAX”
[BACK]
[MAX LIMITS]
[EDIT NEW]
[CLEAR LIMITS] Clear an existing set of limits
(aircraft 1 \ aircraft 2...)
As NEXT, in reverse order
[NEXT]
[PREV]
[SEL] Clear selected limits
CsrƉvq delete
SETUP can be used to select aircraft
Only DEFAULT limits available in USER mode
(aircraft 1 \ aircraft 2...)
[YES]
[NO]
[LOCK AIRCRAFT]
[ON]
[OFF]
[DEFAULT AIRCRAFT]
As NEXT, in reverse order
Select aircraft limits used at power-up. May be locked
[NEXT]
[PREV]
[SEL]
Key/selection