GE Druck DPI612

User Manual Druck DPI612
Page 24 of 105 [EN] English – 109M4017 Revision -
DPI 612 pFlexPro (100 bar) Volume Adjuster
This control increases or decreases the pressure/vacuum.
Before you seal the system (See Section 1.9.3), turn this
control to the necessary position:
• For equal adjustment, turn it to the middle of
its range.
• For maximum adjustment, turn it fully
clockwise or counter clockwise.
When you have set the necessary pressure or vacuum
with the pump (See Section 1.9.5), use the volume adjuster
to make the fine adjustments.
Figure 1-11
100 bar
Volume
Adjuster
DPI 612 hFlexPro (1000 bar) Volume Adjuster
This control increases or decreases the pressure/vacuum.
Before you seal the system (See Section 1.9.3), turn this
control to the necessary position:
• For equal adjustment, turn it to the middle of
its range.
• For maximum adjustment, turn it fully
clockwise or counter clockwise.
When you have set the necessary pressure or vacuum
with the pump (See Section 1.9.5), use the volume adjuster
to make the fine adjustments.
Figure 1-12
1000 bar
Volume
Adjuster