User Manual Druck DPI612
Page 34 of 105 [EN] English – 109M4017 Revision -
1.14.3 Upgrade the Application Software
1. Copy the ‘AMC’ application folder into the root of a USB
flash memory device.
2. Put the USB flash memory drive into the USB type A
connector.
3. Select:
4. Follow the on-screen instructions.
1.14.4 Upgrade the Operating System and Boot Loader Software.
1. Copy the ‘OS’ folder into the root of a USB flash memory
device.
2. Put the USB flash memory drive in the USB type A
connector.
3. Select:
4. Follow the on-screen instructions.
Note: The boot loader can only be upgraded as part of an operating
system upgrade.
Notes:
• If a mistake is made during upgrade and there are no files to
upload, follow the on-screen instructions and complete the
procedure.
• When an upgrade completes normally, the initial operation of the
touch screen may be slower (a period of approximately 30
seconds).
• To make sure the upgrade completed correctly, use the Status
menu.
To Next Page
Loading...
