User Manual Druck DPI612
Page 69 of 105 [EN] English – 109M4017 Revision -
Figure 2-25 Measure DC Volts (10V) or DC mV (10V) on CH1
1. Set the applicable software options.
2. Complete the electrical connections and continue with
the measure operation.
PRESSURE CALIBRATION 2.5
PRESSURE TASKS are available in the TASK MENU. See Section 2.4.1
Basic Calibrator Operation for details.
Select the required function by touching either the appropriate text
or diagram. The DPI612 will set the functions and return to the
CALIBRATOR screen.
Pressure Functions can also be selected through the CUSTOM TASK
function. See Section 2.4.1 for details.
If required, change the Units or the function. If necessary, set a
Utility for the function:
• Max/Min/Avg
• Switch Test
• Relief valve
• Leak Test
To Next Page
Loading...
