User Manual Druck DPI612
Page 77 of 105 [EN] English – 109M4017 Revision -
• TRIGGER
Select one of the following:
a. Key Press (logs one data point each time the button is
pressed).
b. Periodic (logs one data point at a set time interval).
• PERIOD
This option is used to set the time interval for periodic data
logging.
To start Data Logging Mode:
1. Select appropriate options and enter filename for Data Log file.
Note: When entering filename it is first necessary to select
destination (INTERNAL or USB FLASH DRIVE)
2. Select the button.
OPERATION 3.2
In periodic mode, to begin data logging tap ‘Start logging’
button.
In Key press mode, a data point is taken every time the user taps the
log button
To stop Data Logging select
The data logging indicator flashes to indicate whenever a
reading is logged.
To Next Page
Loading...
