User Manual Druck DPI612
Page 76 of 105 [EN] English – 109M4017 Revision -
In Data Logging mode the display data from all active channels is
stored at each data point.
The data can be stored:
• Periodically
• Key press
The data is stored in the internal memory or on a USB Flash Drive
connected to the Unit until the Data Logging is stopped.
SET-UP 3.1
Before starting, set all channels to the correct functions. (See
Chapter2). To access the Data logging function do the following:
Figure 3-2 Data logging Setup
• FILENAME
Enter the filename (10 characters maximum).
DASHBOARD >> DATA LOGGING>> SETUP
To Next Page
Loading...
