GE Druck DPI612 - Set-Up; Define the Reference Channel; Define each Input Channel

User Manual Druck DPI612
Page 82 of 105 [EN] English – 109M4017 Revision -
SET-UP 4.2
1. Set the Druck DPI612 channels in the Calibrator function. (See
Section 2.2.1).
2. Connect the calibrator to the device under test.
3. Enter the Documenting function.
4. Tap the ANALYSIS button.
4.2.1 Define the Reference Channel
1. Tap the channel button that is to be used as the Reference
channel for the analysis.
Figure 4-1 Select Reference Channel
2. Set the channel type to Reference.
3. All other channel settings for that channel are cancelled. All other
active channels are set to Input.
4.2.2 Define each Input Channel
Tap each Input channel button to set the Input options.
DASHBOARD >> DOCUMENTING