User Manual Druck DPI612
Page 68 of 105 [EN] English – 109M4017 Revision -
Figure 2-24 Switch Test
e. Example Procedure: Measure Voltage with Internal Voltage
Source
Figure 2-25 shows CH1 set-up to measure a DC voltage
(±30 V) or DC mV (±2000 mV) with Internal Voltage Source (e.g. for
use with Resistive bridge).
Note: Internal Voltage is provided by connecting to the Vo terminals
on the front of the DPI612 and enabling Voltage (10V) or Millivolts
(10V) as the electrical function.
To Next Page
Loading...
