GE ImageQuant LAS 4000 - Page 48

Changing or installing a filter
Optical filters can be inserted in the filter turrent and registered in the ImageQuant LAS 4000 Control
Software as follows:
3
2, 5
6
4
1
Ensure that the camera head and PC are connected. Turn on the instrument and the PC, and start
the ImageQuant LAS 4000 Control Software.
2
Close the instrument door
3
Select Filter Customization in the Option menu in the ImageQuant LAS 4000 Control Software
main window.
4
Click the Filter down button.
The filter changer is lowered.
5
Open the instrument door.
48 Getting Started with ImageQuant LAS 4000 28-9607-59 AB
4 Operation
4.2 Preparation
4.2.2 Preparing the ImageQuant LAS 4000 for exposure