3.5 European Process Order Select
Several components like cables, stationary rails, etc. are length selectable. This selection
should reflect the particularities encountered by an Installation Specialist on Site.
All cable and component selections must be sent at least 6 weeks before RSDD to your PMC.
The selection tool is available on the website:
http://supportcentral.ge.com/products/
sup_products.asp?prod_id=99484
Innova
TM
IGS 520, Innova
TM
IGS 530, Innova
TM
IGS 540 Pre-Installation Manual
Direction 5499972-1-1EN, Revision 2
42 3 Delivery Requirements
To Next Page
Loading...