To Next Page

To Previous Page

GE HEALTHCARE

IRECTION 5305880-100, REVISION 3 LOGIQ™ 100 PRO SERVICE MANUAL

Chapter 10 - Quality Assurance Page 10-5

9-4355 Flex Spinner 9-XL99764 Xcelite-hex Blade 7/64

9-43523 Breaker 9-XL99964 Xcelite-hex Blade 9/64

9-43531 6 inch Ext. 9-XLM60 Mini-screwdriver kit

9-65283 Case 8.5 in. x 4.5 in. x 2 in. Deep 9-45072 Pliers 6 inch Diagonal

9-46696 Hex Keys 9-XL100X Wire Stripper/Cutter 5 inch - 100X

9-39829 Torpedo Level, Magnetic 9-XL87CG Pliers - very fine needle nose-87CG

9-38461 Hammer, Ball Peen, 4 oz 9-WEWDT-07 Weller-Soldering-Replacement Tip(1)

9-4280 Universal Joint 1/4 inch 9-WS175-E Wiss - Surgical Scissors

9-WEW60P3 Weller - Soldering Iron, 3 wire KH174 Hemostat 5 inch Straight

9-WECT5B6 Weller - Soldering Iron Tip KH175 Hemostat 5 inch curved

9-WEWDP12 Weller - Desoldering Pump 9-Z9480121 Alignment tool (red)

93383 Flashlight Mini-Mag Lite (AAA Bat.)

9-GH408 Tweezers

21576 Brush - Bristle

9-4516 Pliers 4 1/4 inch Diagonal

Tool ID Description Tool ID Description

Table 10-3 Overview of GE-1 Tool Kit Contents (Continued)

GE-2 Sears Kit (#99034)

Tool ID Description Tool ID Description

9-45381 Pliers, Arc Joint 9 1/2 inch 9-44067 Socket 1 1/16 in. for 1/2 in. drive

9-45092 Pliers, Linesman 8 1/2 inch 9-42679

Socket 10MM Hex for 1/2 in. drive

(2273333)

9-42882 Punch, Pin 3/32 inch 9-44262

Extension 10 inch for 1/2 in. drive

(2273405)

9-42884 Punch, Pin 5/32 inch 9-4258 3/8 inch to 1/2 inch Adapter

9-42886 Punch, Pin 1/4 inch 9-34374 3/8 inch Metric Socket Set - 12 PT

9-42973 Cold Chisel 1/2 inch 9-44311 16mm Socket 12 pt.

9-GH77 Center Punch Automatic 9-33485 Metal Socket Tray

9-GH890 File Handle, Adj. 9-33484 Metal Socket Tray

9-31276 File, Round, Bastard 8 inch 9-33484 Metal Socket Tray

9-31277 File, Half Round, Bastard 8 inch 9-52068 Tap and Drill Set

9-31263 File, Flat Mill 8 inch 9-52722 #6 Tap

Table 10-4 Overview of GE-2 Tool Kit Contents

State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.

See the GEHC Myworkshop System to determine the status of this document.

Approved Document - 5305880-100TPH_r3.pdf Page 176 of 197

GE LOGIQ 100 PRO User Manual

Questions and Answers: