GE HEALTHCARE
D
IRECTION 5305880-100, REVISION 3 LOGIQ™ 100 PRO SERVICE MANUAL
Page 7-10 Section 7-2 - Power On Diagnostics
7-2-4 Monitor Test
The following test patterns are displayed on the monitor when this test is enabled. Please match
the patterns
displayed on your monitor with the given patterns figures 7-7 to 7-13. The Gain Knob
is used for selection of patterns 1-10. To exit out of any pattern and return to the main menu, press
EXTERNAL VIDEO.
Figure 7-7 Monitor Test
Figure 7-8 Monitor Test
State: RELEASE - Document is released and under formal Change Control. Changes are subject to the ECR/ECO Process.
See the GEHC Myworkshop System to determine the status of this document.
Approved Document - 5305880-100TPH_r3.pdf Page 115 of 197
To Next Page
Loading...
Need help?
General
