GE LOGIQ E9 Service Manual

GE
D
IRECTION 5535208-100, REV. 2 LOGIQ E9 SERVICE MANUAL
8 - 8 Section 8-4 - Loading / Reloading / Upgrading the Software
8-4-4 Space management - moving all images
Refer to the latest revision of the LOGIQ E9 Basic User Manual, Chapter 3 to perform the following
tasks:
• Configure the Disk Management Function
• Set the Disk Management Schedule
• Configure Data Management Settings
• Configure Destination Device Setting
• Run the Disk Management Function
• Start Disk Management Manually
Speak with the personnel at the site to determine which patient images need to be backed up prior to
starting.
NOTICE
In order to complete a successful restore of the Patient Database, if needed, the images must be moved
away from LOGIQ E9 before doing backup of the Patient Database. Depending on the location set-up,
either move the images to a remote server or to removable media like DVD or CD discs.
As the images are moved, the database will point to the new location.
If the backup procedure is not completed correctly, the images and database information could be lost.

GE LOGIQ E9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor