GE LOGIQ E9 Service Manual

GE
D
IRECTION 5535208-100, REV. 2 LOGIQ E9 SERVICE MANUAL
Chapter 8 Replacement procedures 8 - 27
8-4-7 Loading the Application Software Only (cont’d)
NOTE: All systems must have at least the Basic Option string for the software to run. Any single Option String
may enable multiple options (i.e., Basic).
R2.x.x requires basic plus BT2010 option String.
Demo Option strings turn on all options for a limited period of time. Do Not leave a demo Option string
in a unit when it is sold to a customer.
8-4-7-1 Verifying the software versions
1.) From the Touch Panel, select Utility -> System -> About.
2.) Verify the software version. Ensure that the software version shown on the screen matches the
disk label.
Figure 8-19 Enter Option String

GE LOGIQ E9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor