GE
D
IRECTION 5535208-100, REV. 2 LOGIQ E9 SERVICE MANUAL
Chapter 3 LOGIQ E9 Setup 3 - 35
3-7-5-2 Installing a Software Option
1.) From the Touch Panel, select Utility -> Admin -> System Admin.
2.) Enter the new option key code in the SW Option Key section.
3.) Select the Add button.
Figure 3-20 System Admin screen, R1.x.x - Add button
Figure 3-21 System Admin screen, R2.x.x or later - Add button
INCORRECT PASSWORD ENTRY WILL RESULT IN LOSS OF SYSTEM OPTIONS.
IF PASSWORD IS INCORRECT, PLEASE CONTACT YOUR LOCAL GE SERVICE
REPRESENTATIVE OR THE ONLINE CENTER.
To Next Page
Loading...
