GE LOGIQ V1 Basic Service Manual

System Setup
3-40 LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
Option Setup
Software Option Installation Procedure
NOTE: Not all features described in this section may be available or
cleared for sale in all markets. Please contact with your local GE
Ultrasound representative to get the latest information.
1. Power on the system.
NOTE: Keep the power cord connection during the installation.
2. After the power-up sequence is complete, press Utility on
the control panel, and then select Admin.
3. In System Admin tab, enter New Option Key, and then
select Add.
Figure 3-21. New Option Key
WARNING
For software Option Installation, the operator must login as
Administrator.

GE LOGIQ V1 Specifications

General

Brand	GE
Model	LOGIQ V1
Category	Medical Equipment
Language	English