General procedures
LOGIQ V2/LOGIQ V1 – Basic Service Manual 4-13
5610739-100 English Rev.10
Exit to Windows Desktop from the LOGIQ V2/LOGIQ V1 application
software
Follow these steps if you want to exit to the Windows Desktop
when the application software is running. The Service Dongle
must be plugged in.
1. On the alphanumeric keyboard, press Ctrl+Alt+Delete and
then select Task Manager.
Figure 4-5. Windows Security (For R1.0.x)
Figure 4-6. Windows Security (For R1.1.x)
To Next Page
Loading...
