GE LOGIQ V1

General Procedures and Functional Checks
4-40 LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
Power supply test & adjustments
Power Supply Test Procedure
There is no need to do any special tests on the Power Supplies
if there don’t seems to be a problem that may be related to the
Power Supply.
Power Supply Adjustment
There are no adjustments on the power supply. The DC Power
is self-regulated. If a voltage is outside the specified range, it
means that something is wrong, either with the power supply
itself or with a unit connected to that specific power outlet. When
an error occur, the power will be turned off immediately.