GE LOGIQ V1

General Procedures and Functional Checks
4-2 LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
Overview
Purpose of this chapter
This chapter provides procedures for quickly checking major
functions of the scanner and diagnostics instructions using the
built-in service software.
Contents in this chapter
• ‘Overview’ on page 4-2
• ‘General procedures’ on page 4-3
• ‘Functional checks’ on page 4-24
• ‘Power supply test & adjustments’ on page 4-40
Special Equipment required
To perform these tests, you'll need any of the sector, linear, or
convex probes. (Normally you should check all the probes used
on the system).