GE LOGIQ V1

General Procedures and Functional Checks
4-20 LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
Data Management
Refer to the latest revision of the LOGIQ V2/LOGIQ V1 User
Manual to perform the following tasks:
• Configuring the Disk Management Function
• Setting the Disk Management Schedule
• Configuring Data Management Settings
• Configuringestination Device Setting
• Running the Disk Management Function
• Starting Disk Management Manually
Backup
For more information, refer to the latest revision of the LOGIQ
V2/LOGIQ V1 User Manual.
Restore the factory defaults
For instructions, please see “Data Backup and Restore” in the
User Manual/User Guide.
Installation and Setup Procedure for Peripherals
Please refer to ‘Peripherals Installation Instructions’ on
page 3-22.