System Setup
3-18 LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
System Configuration
Purpose of this section
This section describes how to configure the LOGIQ V2/LOGIQ
V1.
LOGIQ V2/LOGIQ V1 configuration
For complete instructions, refer to the latest revision of the
LOGIQ V2/LOGIQ V1 Basic User Manual, Chapter 16.
Information includes Entering Location, Adjusting Date and
Time, Selecting User interface Language, Selecting Online
Manual Language, Selecting Unites of Measure.
To Next Page
Loading...
