General procedures
LOGIQ V2/LOGIQ V1 – Basic Service Manual 4-9
5610739-100 English Rev.10
Power off
When you switch off the unit, the system performs an automatic
shutdown sequence.
The SYSTEM - EXIT menu, used when switching off the unit,
gives you these choices:
Figure 4-3. System Exit Window
• Logoff
Use this button to log off the current user.
The system remains ON and ready for a new user to log on.
If the Logoff button is dimmed, it indicates that no user is
logged on to the unit at the moment.
• Shutdown
Use this button to shut down the system. The entire system
will shut down. It is recommended to perform a full shutdown
at least once a week.
If the Shutdown button is dimmed, use the key-combination
<Ctrl+Alt+Delete> to shut down the unit.
NOTE: To enable the key-combination <Ctrl+Alt+Delete>, the
dongle should be connected to the system.
To Next Page
Loading...
