General Procedures and Functional Checks
4-10 LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
Power off (continued)
• Exit
(Only available when logged in as GE Service with Service
Dongle)
Select this button when you want to exit to Windows
Desktop.
• Cancel
Use this button to exit from the System-Exit menu and
return to the previous operation.
System shutdown
Disconnect the Mains Power Cable is necessary. For example:
Relocating the scanner.
DO NOT unplug and/or transport the unit until after the power
off sequence has been completed. Failure to do so may result
in corrupted patient files.
To Next Page
Loading...
