Software Reload
LOGIQ V2/LOGIQ V1 – Basic Service Manual 6-15
5610739-100 English Rev.10
Software download and installation (continued)
Multiple screens appear during the software installation
process. DO NOT interrupt this process AND follow
instructions as they appear on the display.
NOTE: A typical installation may take up to 15 minutes.
4. After the installation complete, select Shutdown and then
press Power On/Off button to reboot the system.
Figure 6-14. Shutdown after Software Installation (For R1.0.x)
Figure 6-15. Shutdown after Software Installation (For R1.1.x)
To Next Page
Loading...
