GE LOGIQ V1 Basic Service Manual

Care and Maintenance
10-34 LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
Ultrasound Inspection Forms (continued)
Figure 10-7. Functional Checks
Figure 10-8. Electrical Safety
FUNCTIONAL CHECKS SPECTION AND CLEANING
COMMENTS:
_________________________ ____________________________ _________________________
_________________________ ____________________________ _________________________
_________________________ ____________________________ _________________________
_________________________ ____________________________ _________________________
Functional Check (if applicable)
OK? or
N/A
Physical Inspection and Cleaning
(if applicable) Inspect Clean
elosnoCnoitcnuF edoM-B
DCLnoitcnuF sedoM relppoD
O/I lanretxEnoitcnuF edoM-FC
srotcennoC dna selbaCnoitcnuF edoM-M
Applicable Software Opti la
rehpireP devorppA EGsno s (DVD-RW, Printer)
ilebaLsnoitpO erawdraH elbacilppA ng (see User Manual for Labeling)
Control Panel
LCD
Measurement Accuracy
GE Approved Peripherals
PHYSICAL IN
ELECTRICAL SAFETY
Final Check. All system covers are in place. System scans with all probes as expected.
Accepted by: ______________________________________________________________________
Electrical Test Performed
Max Value
Allowed
Value
Measured OK? Comments
Outlet (correct ground &wiring cong.)
Type BF Applied Part Leakage Current
Limits- Probe
enclosure Source Leakage Current -
Chassis Leakage Current Limits
Peripheral 1 Leakage Current
Peripheral 2 Leakage Current
PROBES
Probe Number
(from previous page)
Max Value
Allowed
Max Value
Measured OK? Comments
Probe 1:
Probe 2:
Probe 3:

GE LOGIQ V1 Specifications

General

Brand	GE
Model	LOGIQ V1
Category	Medical Equipment
Language	English