Safety considerations
LOGIQ V2/LOGIQ V1 – Basic Service Manual 1-19
5610739-100 English Rev.10
Probes
Follow these guidelines before connecting a probe to the
Ultrasound system:
• Inspect the probe prior to each use for damage or
degradation to the:
• housing
• cable strain relief
• lens
• seal
• connector pins
• locking mechanism
• Do not use a damaged or defective probe.
• Never immerse the probe connector or adapter into any
liquid.
Peripherals
Refer to the Patient Safety Environment section of the User’s
Manual for peripheral isolation information.
To Next Page
Loading...
