GE MDS 9790 Series User Manual

34 MDS 4790/9790 Series I/O Guide MDS 05-3438A01, Rev. F
Table 7. PC Commands—Radio Operation
TERMINAL
COMMAND
FRONT
PANEL MENU
DESCRIPTION
BATT(ery) [ON/OFF]
Details, page 41
Battery Backup
Details, page 73
Enable or disable alarms derived from monitor-
ing the internal back-up battery.
BAUD [xxxxx abc]
Details, page 42
Baud Rate/Format
Details, page 70
Set or display communication attributes for the
data interface port
xxxxx=Baud rate (110, 300, 1200, 2400, 4800,
9600, 19200, 38400)
a=7 or 8 data bits
b=N for none, O for odd, E for even parity
c=1 or 2 stop bits
BUFF [ON/OFF]
Details, page 42
Data Buffering
Details, page 74
Enable or disable received data buffering
ON=Seamless data
OFF=Fast byte throughput
CKEY [ON/OFF]
Details, page 43
Continuous Keying
Details, page 72
Enable or disable continuous keying
ON=Continuous keying enabled
OFF=Continuous keying disabled
CTS [0-255]
Details, page 43
Clear-to-Send Delay
Details, page 70
Set or display CTS delay. Setting a value of 0
keeps CTS normally asserted.
DATAKEY [ON/OFF]
Details, page 44
Key On Data
Details, page 73
Toggle between key-on-data and key-on-RTS
ON=Key-on data
OFF=Key-on RTS
DATE [mmm dd yyyy]
Details, page 44
Set Date
Details, page 77
Set or display the current date
DMGAP [xx]
Details, page 45
None Set the amount of time to wait after receiving a
character before interpreting the next received
character as the start of a new message
EMP [ON/OFF]
Details, page 46
Emphasis
Details, page 70
Enable or disable pre-emphasis and
de-emphasis
INIT
Details, page 46
None Set all operating parameters to default settings
MODEM
[NONE/4800/9600/1920
0/DEFAULT]
Details, page 48
Modem
Details, page 69
Set or display the radio’s modem type, or spec-
ify analog input
PTT [0-255]
Details, page 50
Push-to-Talk Delay
Details, page 70
Set or display PTT delay
PWR [20–37]
Details, page 51
Output Power Setting
[37-20]
Details, page 69
Set or display forward power output setting
RADIO [AUTO/A/B]
Details, page 51
Radio Selection
Details, page 78
Set or display the active transceiver board
REPEATER [ON/OFF]
Details, page 51
Repeater Mode
Details, page 71
Enable or disable repeater mode
RXMUTE
[ON/OFF/Time in msec]
Details, page 53
RX Mute Mode
Details, page 72
Set or display RX (receive) Muting status
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8457-MDS-UP-9790X.aspx

GE MDS 9790 Series Specifications

General

Brand	GE
Model	MDS 9790 Series
Category	Radio
Language	English