50 MDS 4790/9790 Series I/O Guide MDS 05-3438A01, Rev. F
Options Installed OPT
The OPT command lists each upgradable option and shows whether it is
installed (
ON) or not-installed (OFF). For example:
You can implement several optional features through the use of a soft-
ware “authorization code” that you can purchase from the factory. The
availability of options depends on what hardware is installed and what
features are permitted by the telecommunications regulatory body in
your country. Please contact the factory for further information.
Owner’s Message OWM [xxxxx]
The OWM command allows for display or entry of an optional text mes-
sage such as the system name. The entry can contain up to 30 characters
and will appear on the default screen of the front panel interface.
Owner’s Name OWN [xxxxx]
The OWN command allows for display or entry of an optional text mes-
sage such as the site name. The entry can contain up to 30 characters and
will appear on the default screen of the front panel interface.
Push-to-Talk Keying
Delay
PTT [0-255]
This command sets or displays the amount of time to wait after the radio
receives a keying signal from either the PTT (Push-to-Talk) or RTS
(Request-to-Send) lines before actually keying the transmitter. Entering
the
PTT command without a parameter displays the timer value associ-
ated with the keying delay selection. Entering the PTT command with a
parameter ranging from 0 to 255 sets the timer value in milliseconds. A
timer value of zero means that the radio keys immediately following the
keying signal.
The command is applicable for DCE operation, when the radio is keyed
either by the PTT signal or by RTS. The command is not applicable
when the radio is keyed by the
KEY command.
Diagnostics : ON
Premium Options: OFF
Digital Modem: ON
Set Owner Message screen,
Page 76
A
B
Set Owner Name screen,
Page 76
A
B
Push-to-Talk Delay
screen, Page 70
A
B
To Next Page
Loading...
Need help?
General
