GE Multilink ML3000 - Configuring Tacacs+ with Enervista Secure Web Management Software

8–6 MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
ACCESS USING TACACS+ CHAPTER 8: ACCESS USING TACACS+
8.3 Configuring TACACS+ with EnerVista Secure Web
Management software
 To access the TACACS servers, select the Configuration > TACACS+
menu item.
By default, no TACACS servers are defined.
 To add a server, click on the Add button as shown below.
Note that the TCP port field can be left blank – port 49 is used as a default port. Up to five
TACACS+ servers can be defined.