GE Multilink ML3000 - Configuring Alarm Relays with Enervista Secure Web Management Software

CHAPTER 18: MISCELLANEOUS COMMANDS MISCELLANEOUS COMMANDS
MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 18–5
18.1.3 Configuring Alarm Relays with EnerVista Secure Web Management software
To customize the alarm relays,
 Select the Configuration > Alarms menu item.
Each alarm can be enabled or disabled form the screen shown above. All alarms can be
enabled or disabled using the Alarm Status drop down menu. Relay closure times can be
set using the drop down menu.
 After changing the Alarm settings, save the configuration using the
save icon ( ),