1–18 MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
INTRODUCTION CHAPTER 1: INTRODUCTION
The following example lists commands starting with a specific string:
ML3000> s <TAB>
set
show
ML3000>
In the following example, the <TAB> key completes the command:
ML3000> se<TAB>
password
timeout
vlan
ML3000> set
1.5.10 Exiting
To exit from the CLI interface and terminate the console session use the logout
command. This command prompts to ensure that the logout was not mistakenly typed.
The following syntax applies:
logout
The following example illustrates logging out from a session:
ML3000> logout
Logging out from the current session [’Y’ or ’N’] Y
Connection to the host lost
To Next Page
Loading...
