GE Multilink ML3000 - Configuring Port Security with Enervista Software; Commands

6–12 MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
ACCESS CONSIDERATIONS CHAPTER 6: ACCESS CONSIDERATIONS
6.3 Configuring Port Security with EnerVista Software
6.3.1 Commands
After enabling the EnerVista Secure Web Management software,
 Select the Configuration > Port > Security menu item to configure
port security as shown below.
From the menu shown above, each individual port can be configured for the proper action
on the port, auto learn MAC addresses and specify individual MAC addresses.
 To edit each port, click on the edit icon ( ).
 To enable or disable port security, use the Status drop down menu
as shown below.