GE Multilink ML3000 - Port Mirroring Using Enervista Secure Web Management Software; Commands

9–12 MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
PORT MIRRORING & SETUP CHAPTER 9: PORT MIRRORING & SETUP
9.4 Port Mirroring using EnerVista Secure Web
Management software
9.4.1 Commands
Monitoring a specific port can be done by port mirroring. Mirroring traffic from one port to
another port allows analysis of the traffic on that port.
To enable port mirroring as well as setting up the ports to be “sniffed”,
 Select the Configuration > Port > Mirroring menu item.
 Set the sniffer port and the port on which the traffic is reflected.