18–12 MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
MISCELLANEOUS COMMANDS CHAPTER 18: MISCELLANEOUS COMMANDS
18.5 History
18.5.1 Commands
The commands below may be useful in repeating commands and obtaining history
information.
The
!! command repeats the last command.
!!
The
!1, !2,..., !n commands repeat the nth command (as indicated by a show history).
!<n>
The
show history command displays the last 25 executed commands. If less than 25
commands were executed, only those commands executed are shown.
show history
The history is cleared if the user logs out or if the switch times out. The history count
restarts when the user logs in.
The
show version command displays the current software version.
show version
To Next Page
Loading...
