GE Multilink ML3000 - Configuring Qos with Enervista Secure Web Management Software; Description

14–8 MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
QUALITY OF SERVICE CHAPTER 14: QUALITY OF SERVICE
14.3 Configuring QoS with EnerVista Secure Web
Management software
14.3.1 Description
To access QoS settings,
 Select the Configuration > QoS menu items.
 Select the Port and the port number then edit to set up the Priority.
The following window illustrates the setting of port 13 for port-based
QoS with a priority. Note the sections on Tag and TOS are ignored for
Port settings.