EasyManuals Logo

GE Multilink ML3000 User Manual

GE Multilink ML3000
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #191 background imageLoading...
Page #191 background image
CHAPTER 11: VLAN REGISTRATION OVER GARP VLAN REGISTRATION OVER GARP
MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 11–3
NOTE
Note
If a static VLAN is configured on at least one port of a switch, and that port has established
a link with another device, then all other ports of that switch will send advertisements for
that VLAN.
In the following figure, tagged VLAN ports on switch “A” and switch “C” advertise VLANs 22
and 33 to ports on other GVRP-enabled switches that can dynamically join the VLANs. A
port can learn of a dynamic VLAN through devices that are not aware of GVRP (Switch “B”).
FIGURE 11–2: VLAN assignment in GVRP enabled switches
An “unknown VLAN” is a VLAN that the switch learns of by GVRP. For example, suppose that
port 1 on switch “A” is connected to port 5 on switch “C”. Because switch “A” has VLAN 22
statically configured, while switch “C” does not have this VLAN statically configured, VLAN
22 is handled as an “Unknown VLAN” on port 5 in switch “C”. Conversely, if VLAN 22 was
statically configured on switch C, but port 5 was not a member, port 5 would become a
member when advertisements for VLAN 22 were received from switch “A”. GVRP provides a
per-port join-request option which can be configured.
VLANs must be disabled in GVRP-unaware devices to allow tagged packets to pass
through. A GVRP-aware port receiving advertisements has these options:
If there is no static VLAN with the advertised VID on the receiving port, then
dynamically create a VLAN with the same VID as in the advertisement, and allow
that VLAN's traffic
If the switch already has a static VLAN with the same VID as in the advertisement,
and the port is configured to learn for that VLAN, then the port will dynamically join
the VLAN and allow that VLAN's traffic.
Ignore the advertisement for that VID and drop all GVRP traffic with that VID
Don't participate in that VLAN
A port belonging to a tagged or untagged static VLAN has these configurable
options:
Send VLAN advertisements, and also receive advertisements for VLANs on other
ports and dynamically join those VLANs
Send VLAN advertisements, but ignore advertisements received from other ports
Avoid GVRP participation by not sending advertisements and dropping any
advertisements received from other devices
754722A1.CDR
Switch A
GVRP On
Tagged
VLAN 22
Switch B
No GVRP
Tagged
VLAN 22
Switch C
GVRP On
Tagged
VLAN 22
Tagged
VLAN 33
Switch D
GVRP On
Dynamic
VLAN 33
Dynamic
VLAN 22
Switch E
GVRP On
Dynamic
VLAN 33
Dynamic
VLAN 22
15
11
12
3
6
7
2
Switch C
Port 5 dynamically joined VLAN 22
Ports 11, 12 belong to Tagged VLAN 33
Switch E
Port 2 dynamically joined VLAN 33
Ports 7 dynamically joined VLAN 33
Switch D
Port 3 dynamically joined VLAN 33
Ports 6 dynamically joined VLAN 33

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE Multilink ML3000 and is the answer not in the manual?

GE Multilink ML3000 Specifications

General IconGeneral
BrandGE
ModelMultilink ML3000
CategoryNetwork Router
LanguageEnglish

Related product manuals