GE Multilink ML3000 User Manual

14–10 MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
QUALITY OF SERVICE CHAPTER 14: QUALITY OF SERVICE
Next, to enable a tag-based QoS on port 14, select edit port 14 then enable tag QoS status.
Note that only the menu area for the tag setting is relevant.
To set the tag-level settings, select Edit in the Tag settings screen.
After the Tag QoS settings are completed, the changes are reflected on the QoS tag menu
screen.

GE Multilink ML3000 Specifications

General

Brand	GE
Model	Multilink ML3000
Category	Network Router
Language	English