16–16 MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
SNMP CHAPTER 16: SNMP
The following command sequence illustrates how to configure RMON groups.
ML3000(rmon)## rmon
ML3000(rmon)## event def-owner=test def-comm=somestring
RMON Event Default Owner is set
RMON Event Default Community is set
ML3000(rmon)## show rmon event
RMON Event Default Owner : test
RMON Event Default Community : somestring
ML3000(rmon)## exit
ML3000#
To Next Page
Loading...
