GE Optica - Menu 1

January 2006
4-6 Programming the VGA Optica
Menu 1 The first menu is shown in Figure 4-3 below. This menu is accessed
by selecting the Menu control button on the main screen and pressing
ENTER.
Figure 4-3: Menu 1
Menu 1 allows programming of the following items:
Analog Outputs For more information on using the analog outputs, see Analog
Outputs on page 2-9.
Table 4-3: Analog Output Options
Item Function Available Options
Output
Choose which output channel is being programmed A and/or B
Parameter
Choose which parameter will be output on the
selected channel
Humidity, Temperature,
Pressure or User Equation
Units
Choose the units for this parameter
(See Table 4-1 on page 4-4
for the parameter chosen)
Upper Limit
Set the parameter value that will produce full-scale
output
(Enter a number)
Lower Limit
Set the parameter value that will produce zero
output
(Enter a number)