August 2003
7-6 Logging Data
Setting up a New Log (cont.)
Figure 7-5: The General Log Format Window
To step through each parameter, press the [T] key.
1. The first prompt asks you to choose between a linear or
circular format for the log.
a. Use the [
W] and [X] keys to scroll to the appropriate radio
button.
b. Press
[ENTER] to confirm your selection.
2. The next prompt asks you to choose whether the log is to be a
standard or error log.
a. Use the [
W] and [X] keys to scroll to the appropriate
radio button.
b. Press
[ENTER] to confirm your selection.
3. The next prompt asks for the starting date and time.
General
Measurements
Cancel
Activate
Log Name
10SEC.LOG
End Date/Time
Standard
Error
Linear
Circular
Type
Format
Logging Interval
Start Date/Time 01:38:08
2000/11/01
10
09:38:08
secs
2000/11/01
To Next Page
Loading...
