GE PQMII - 5.2.12 Product Options

5–18 PQMII POWER QUALITY METER – INSTRUCTION MANUAL
CHAPTER 5: SETPOINTS
5.2.12 Product Options
PATH: SETPOINTS Ö S1 PQMII SETUP ÖØ PRODUCT OPTIONS
The PQMII can have options and certain modifications upgraded on-site via use of a
passcode provided by GE Multilin. Consult the factory for details on the use of this feature.
 PRODUCT [Z]
OPTIONS
SELECT ORDER:
PQMII-T20-C-A
Range: see range in PQMII Modbus
memory format code F116
MESSAGE
SELECT MOD1 TO
ENABLE: 0
Range: 0 to 999 in steps of 1
MESSAGE
SELECT MOD2 TO
ENABLE: 0
Range: 0 to 999 in steps of 1
MESSAGE
SELECT MOD3 TO
ENABLE: 0
Range: 0 to 999 in steps of 1
MESSAGE
SELECT MOD4 TO
ENABLE: 0
Range: 0 to 999 in steps of 1
MESSAGE
SELECT MOD5 TO
ENABLE: 0
Range: 0 to 999 in steps of 1
MESSAGE
ENTER PASSCODE: _
Range: consult the factory