GE PQMII - Order Codes; Order Code Table; Modifications; Accessories

CHAPTER 1: OVERVIEW
PQMII POWER QUALITY METER – INSTRUCTION MANUAL 1–13
1.5 Order Codes
1.5.1 Order Code Table
The order code for all options is: PQMII-T20-C-A
* The voltage disturbance recorder is only available with the 25 MHz processor.
1.5.2 Modifications
Consult the factory for any additional modification costs):
• MOD 501: 20 to 60 V DC / 20 to 48 V AC Control Power
• MOD 502: Tropicalization
• MOD 504: Removable Terminal Blocks
• MOD 506: 4-Step Capacitor Bank Switching (Available with Option "C" only)
1.5.3 Accessories
Consult the factory for any additional accessory costs:
• EnerVista PQMII Setup Software (included with the PQMII; also available at http://
www.enerVista.com)
• RS232 to RS485 converter (required to connect a PC to the PQMII RS485 ports)
• GE MultiNET RS485 serial-to-Ethernet converter (required for connection to an
Ethernet network)
• RS485 terminating network
1.5.4 Control Power
• 90 to 300 V DC / 70 to 265 V AC standard
• 20 to 60 V DC / 20 to 48 V AC (MOD 501)
Table 1–1: Order Codes
PQMII
S S S
Basic Unit PQMII –
|
|
|
|
–
|
|
|
|
–
|
|
|
|
Basic unit with display, all current/voltage/power
measurements, one (1) RS485 communication port,
one (1) RS232 communication port
Transducer
Option
T20 –
|
|
|
|
–
|
|
|
|
Four (4) isolated analog outputs, 0-20 mA and 4-20
mA assignable to all measured parameters, 4-20 mA
analog input, 2nd RS485 communication port
T1
|
|
|
|
–
|
|
|
|
Four (4) isolated analog outputs, 0-1 mA assignable
to all measured parameters, 4-20 mA analog input,
2nd RS485 communication port
Control
Option
C–
|
|
|
Three (3) additional programmable output relays (for
a total of 4), 4 programmable switch inputs
Power Analysis
Option
A
Harmonic analysis, triggered trace memory,
waveform capture, event recorder, data logger,
voltage disturbance recorder*