1–12 PQMII POWER QUALITY METER – INSTRUCTION MANUAL
CHAPTER 1: OVERVIEW
1.4 EnerVista PQMII Setup Software
1.4.1 Overview
All data continuously gathered by the PQMII can be transferred to a third party software
program for display, control, or analysis through the communications interface. The
EnerVista PQMII Setup Software allows the user to view and manipulate this data and
assists in programming the PQMII. Some of the tasks that can be executed using the
EnerVista PQMII Setup Software package include:
• reading metered data
• monitoring system status
• changing PQMII setpoints on-line
• saving setpoints to a file and downloading into any PQMII
• capturing and displaying voltage and current waveforms for analysis
• recording demand profiles for various measured quantities
• troubleshooting communication problems with a built in debugger
• printing graphs, charts, setpoints, and actual values
The EnerVista PQMII Setup Software is fully described in Software on page 4–1.
FIGURE 1–10: EnerVista PQMII Setup Software Main Window
To Next Page
Loading...
