CHAPTER 6: MONITORING
PQMII POWER QUALITY METER – INSTRUCTION MANUAL 6–17
FIGURE 6–2: Pulse Input Timing
6.2.9 Analog Input
PATH: ACTUAL VALUES Ö A1 METERING ÖØ ANALOG INPUT
This message displays the measured 4 to 20 mA analog input scaled to the user defined
name and units. The analog input can be configured via a switch input and output relay to
multiplex two analog input signals. The displayed user defined name and units will change
to the corresponding values depending upon which analog input is connected. Refer to
5.3.3 Analog Input for information regarding user defined names and units as well as
analog input multiplexing.
≥ 150 ms
OPENCLOSED
OPENOPEN
CLOSED
CLOSED
SWITCHACTIVATION = OPEN
SWITCHACTIVATION = CLOSED
STATUS STATUS
STATUS
≥ 150 ms
ANALOG INPUT [Z] MAIN/ALT ANALOG INPUT
20.1 mA
To Next Page
Loading...
